ScreenBeam 960 Firmware
Current version
Previous versions
Release notes
- The new default login password is now “screenbeam” if one of the following scenarios applies:
- You have a brand new ScreenBeam receiver with version 9.15.44.0 (or later)
- A force firmware update to 9.15.44.0 (or later) is applied to the ScreenBeam receiver
- The ScreenBeam receiver has been restored to factory default post 9.15.44.0 (or later) firmware update
Version 9.15.49.2
- Release date: 2024, Sept 5
- Changes since 9.15.49.0
- Improvements and fixes
- Improves stability for CMS Enterprise connectivity and online status reporting
- Fixed bug where receiver may not reconnect to Wi-Fi access point SSID after a few reboots
- Fixed bug where the receiver may reboot randomly or upon a Miracast connection request
Version 9.15.49.0
- Release date: 2023, Aug 13
- Changes since 9.15.48.0
- Improvements and fixes
- Fixed Miracast screen mirroring is pixelated when connecting from a 16:10 native resolution Windows system
Version 9.15.48.0
- Release date: 2023, Mar 02
- Changes since 9.15.47.0
- Improvements and fixes
- Fixed WIFi network SSID field could not support the & character
- Fixed issue where some receivers cannot reconnect to the WiFi network upon a restart
- Fixed occasional issue where some receivers cannot load the home screen after a long period of idling or after restart
Version 9.15.47.0
- Release date: 2022, Aug 09
- Changes since 9.15.46.0
- Improvements and fixes
- Support TLS 1.2 for wireless network connection
- Fixed issue where the receiver connected to a Newline touch display may become non-responsive after the display power cycle
Version 9.15.46.0
- Release date: 2021, Jun 01
- Changes since 9.15.45.0
- Improvements and fixes
- Fixed issue where Apple Macbook with the new M1 chipset cannot connect
- Fixed issue where SMART touchscreen 7000/7000R stops working with version 9.15.45.0
- Fixed issue where the receiver may auto-reboot due to the oversized event log
- Fixed WiFi network name can't support the "_" character
- Improve system security
Version 9.15.45.0
- Release date: 2020, Oct 29
- Changes since 9.15.44.0
- Improvements and fixes
- Supports custom NTP server configuration
- Improves Miracast connection stability for Windows 10 build 19H1/19H2/20H1 (#9805)
- Addressed a compatibility issue with Promethean ActivePanel touchscreen with board v4.0.0.220 and bezel v6.4.66.42 or newer (#10824)
- Updated behavior for the Display Off state to resume only when waking On Connect or On Scan by a client device (#11310)
- Fixed bug where CMS fails to set NTP time server (#11128)
- Fixed bug where time zone and daylight saving time settings can be reset to default by CMS (#11180)
- Fixed bug where AirPlay mirroring does not work after the initial Wi-Fi network configuration via local management (#10991)
- Fixed bug where AirPlay mirroring stops working after the wireless AP, that ScreenBeam is connected to, changes its channel (#10971)
- Fixed bug where an unexpected black screen may occur after a projector/display is turned off completely (not sleep) and back on (#10865)
- Fixed bug where ScreenBeam cannot be seen from Miracast client devices after a crash event occurred and could not self-recover (#9791)
- Fixed bug where ScreenBeam cannot be seen from Miracast client devices after the P2P Operation Channel is changed (#10891)
- Fixed issue where ScreenBeam may connect to the wrong CMS server address if "aeisbcms" hostname and FQDN pointing to different IP (#9873)
- Provides CMS the ability to export receiver MAC address from CMS (#9563)
- Deprecates support for Rx Log upload timer (#9420)
Version 9.15.44.0
- Release date: 2020, Jan 15
- Changes since 9.15.43.0
- New features and enhancements
- Display Sharing Mode - Options for how ScreenBeam should behave
- Single (default) - ScreenBeam supports only 1 connection at a time. The first Miracast device to connect will have full ownership of the display.
- Quick Switch - ScreenBeam supports only 1 connection at a time. However, another Miracast device in the same room could connect and take over the session.
- 4-digit PIN option for Miracast connection
- Display Sharing Mode - Options for how ScreenBeam should behave
- Improvements and fixes
- Fixed issue where some Windows 10 build 1607 may not connect reliably due to HDCP related issue (#9250)
- Fixed issue related to audio glitching during MacOS AirPlay full screen mirroring (#8643)
- Fixed issue related to the Quick Switch function does not properly switch to the newly connected source
- Fixed issue where some Android devices may project a blank/black screen upon Miracast (#9102)
- Fixed issue where some Android devices may disconnect after a short period of Miracast mirroring (#9085)
- Changed LMI administrator default login password to "screenbeam" (#8912)
- Fixed issue where the system time is set incorrectly after a new EAP-TLS cert is applied via CMS (#8925)
- Fixed issue where ScreenBeam mirrored image may freeze from a Surface Pro Miracast connection (#8763/#8770)
- Mitigates random Miracast disconnect from Windows 10 1903/1909 systems in a certain environments (#8798)
- Fixes occasional black screen with only mouse cursor is shown upon Miracast connection for some Windows 10 systems (#8776/#8773)
Version 9.15.43.0
- Release date: 2019, Oct 10
- Changes since 9.15.43.0
- Improvements and fixes
- Fixed issue where HDMI/VGA Power Management fails to start when there's no network connection available (#8738)
- Fixed issue where MacOS screen mirroring stream may drop when port scanning is done on the same network (#8590)
- Fixed issue where Miracast (NGO) connection always requires PIN code entry while PIN set to require once (#8587)
- Fixed issue where VGA & HDMI can output simultaneously after a hot-plug event from the HDMI connection thus may cause signal degradation or flickering (#8289)
- Fixed issue where WPA/WPA2 passphrase field cannot accept certain characters such as < > - $ (#7313)
- Modified system to not activate VGA output when HDMI connection is detected upon startup (#8171)
- Increased the screen saver image resolution and font size (#8170)
- Improved the time of disconnect and returns to the Ready to Connect screen (#7970)