Skip to content
Sign in
Open Ticket
  • There are no suggestions because the search field is empty.

Huddly IQ camera best practices

This article applies to the following ScreenBeam products: 1100P and Conference

The Huddly IQ camera occasionally consumes more power than the ScreenBeam receiver's USB 2.0 port could provide. In addition, the Huddly camera uses a video format ScreenBeam 1100 Plus currently cannot support when it's connected to the USB 3.0 port. 

Therefore, we recommend connecting the Huddly IQ camera through a Powered USB 2.0 Hub and connecting the USB 2.0 Hub to ScreenBeam 1100 Plus USB 2.0 port. This allows the Huddly camera to maintain its power and output a video format that's supported by ScreenBeam. Setting up the Huddly IQ camera + Powered USB 2.0 hub + ScreenBeam 1100 Plus

  1. Connect the power for the Powered USB hub
  2. Connect the Input USB cable from the USB hub to a USB 2.0 port of the ScreenBeam receiver
  3. Connect the USB cable from the Huddly camera (Type-C connector) to the USB Hub (Type-A connector)
  4. Connect the USB speakerphone to an available USB port of the Powered USB hub